Statiq Nectar smart home EV charger with Type 2 cable and Statiq app
Statiq guide to choosing a 7.4 kW, 11 kW or 22 kW home EV charger
Statiq Nectar EV charger wall-mounted with feature icons
RFID card tapped on the Statiq Nectar EV charger to start charging
Statiq app map of public chargers with Statiq RFID cards
Technician installing a Statiq Nectar EV charger on a home wall
Map of Statiq EV charger service presence across India
Statiq Nectar EV charger mounted on an outdoor wall next to an electric car
Statiq Nectar EV charger with Type 2 cable plugged in, mounted on a wooden wall
Statiq Nectar smart home EV charger with Type 2 cable and Statiq app

Statiq Nectar Smart Home EV Charger (11 kW / 22 kW)

No ratings yet

Three-phase Type 2 AC home charger in 11 kW and 22 kW versions, with app and RFID control, dynamic load balancing, auto cut-off, 5 m cable and IP66 rating. ARAI certified, 2-year warranty.

We may earn a small commission from purchases made through this affiliate link. You pay the same or lower price available in the market.

Key Features:
  • Available in 11 kW and 22 kW three-phase versions
  • Future-ready 22 kW version charges any Type 2 EV at its full AC rating: 7.2, 11 or 22 kW
  • Type 2 connector with 5 m cable
  • Start charging via app, RFID card or Free Vending (plug and charge)
  • Dynamic load balancing and auto cut-off
  • IP66 rated, with ground fault, voltage, residual current, surge and temperature protection
  • ARAI certified, 2-year warranty
Product Description

The Statiq Nectar is a smart AC charger for homes with a three-phase power supply, sold on Amazon in 11 kW and 22 kW versions. Statiq also runs one of India's larger public EV charging networks, and the Nectar works with the same Statiq app. Both versions have the same features and a 2-year warranty.

11 kW vs 22 kW

 11 kW22 kW
Output currentAbout 16 AAbout 32 A
SupplyThree-phase, 415 VThree-phase, 415 V
Charging speed for an EV with a 7.2 kW single-phase onboard chargerAbout 3.7 kWFull 7.2 kW
Charging speed for an EV with an 11 kW three-phase onboard chargerFull 11 kWFull 11 kW
Charging speed for an EV that accepts 22 kW AC11 kWFull 22 kW
Examples of compatible EVs (per Statiq)BYD Seal, BMW i3, Mercedes-Benz EQC, Audi e-tron, Porsche Taycan, Mahindra BE 6 and XEV 9eHyundai Ioniq 5, Mercedes-Benz EQS, Jaguar I-Pace

Which one should you buy?

It depends on your car's onboard charger, not just on how big the number on the charger is.

Short answer: the 22 kW version is the future-ready choice. It charges every Type 2 EV at the full AC power the car can take, whether that is 7.2 kW single-phase, 11 kW three-phase or 22 kW three-phase. The 11 kW version gives full speed only to cars with an 11 kW three-phase onboard charger. If you change cars later, the 22 kW charger will still deliver the new car's full AC speed.

If your EV has a 7.2 kW single-phase onboard charger, as many EVs sold in India do, buy the 22 kW version. A single-phase car draws power from only one of the three phases. The 11 kW Nectar supplies about 16 A per phase, so the car gets only about 3.7 kW (16 A x 230 V), roughly half its rated speed. The 22 kW version supplies about 32 A per phase, so the same car charges at its full 7.2 kW.

If your EV has an 11 kW three-phase onboard charger, the 11 kW version gives you full speed. The 22 kW version would charge it at the same 11 kW, but it keeps you covered if your next EV charges faster or is a single-phase 7.2 kW car.

If your EV accepts 22 kW AC charging, which few cars in India do, the 22 kW version is the only one that gives you full speed.

Check your car's onboard charger rating, and whether it is single-phase or three-phase, in its spec sheet or owner's manual before you buy. The 22 kW version also needs a higher sanctioned load than the 11 kW version.

Compatibility

Both versions use a Type 2 connector and work with Type 2 EVs from Tata, Mahindra, Hyundai, BMW and other brands. If your home has only a single-phase supply, you need a single-phase charger instead.

Smart features

  • Statiq app for real-time monitoring, remote control and scheduling charging during off-peak hours
  • Start a charge with the app, an RFID card or Free Vending (plug and charge)
  • Dynamic load balancing adjusts power use based on your home's load
  • Auto cut-off stops charging when the battery is full
  • Regular software updates
  • Home and public charging sessions managed in one Statiq app

Safety and build

  • IP66 water and dust protection, suitable for indoor or outdoor use
  • Ground fault, under/over-voltage, internal residual current, surge, mains presence and high-temperature protection
  • ARAI certified
  • Anti-theft wall mounting. Can also be stand-mounted.
  • Operating temperature: -20°C to +55°C
  • 5 m Type 2 cable as standard, with 7 m and 10 m options
  • Night Black finish, 14.8 x 25.9 x 43.6 cm, 3 kg

Before you buy

  • You need a three-phase 415 V ±10% connection at home. Have an electrician check your wiring and sanctioned load before installation, especially for the 22 kW version.
  • Brand installation can be pre-booked for free on Amazon. You pay ₹1,200 + GST to the technician after the service, according to the listing.

0

(0 Reviews)

No reviews yet.